Base - Towel holder - Brushed stainless steel
606095-41Base towel holder is a sleek and functional detail for the modern bathroom. With its minimalist and clean design, it fits seamlessly into various environments and contributes to a cohesive look alongside other products in the Base series. The towel holder is slightly shorter than a traditional towel bar and can be used either for hanging a folded towel or neatly stacking rolled towels. It mounts easily with a self-adhesive backing, eliminating the need for drilling and reducing the risk of wall damage. It adheres securely to smooth, durable surfaces such as tile, lacquered, or veneered materials. The Base towel holder is available in brushed stainless steel, polished chrome, or matte black finishes to match the details in your bathroom.
Important to note: The product does not adhere to uneven surfaces, across grout lines, or on surfaces that may shift, such as wet room wallpaper. For best results, the mounting surface should be completely smooth and level. If the holder's mounting points are placed on different tiles, it is essential that these tiles are aligned at the same height and angle. On newly tiled walls, ensure the surface is thoroughly cleaned of grout residue before installation. If in doubt, consult a professional.
Mounting instructions
- Clean the substrate thoroughly and allow it to dry. (The detergents shall not contain oil)
- Remove the protective film.
- Apply the product by pressing it against the substrate for 10 seconds.
- For the best results, allow the glue to harden for 24 hours before use.
When cleaning the product, use a clean, damp cloth.
- Specifications
-
Article depth: 45 mm Article length: 250 mm Article width: 50 mm - Care instructions
Care advice for our bathroom accessoriesWhen cleaning the product, use a soft, clean, and slightly damp cloth to avoid scratching or damaging the surface. Rinse or wipe with water and dry thoroughly. Stubborn dirt or deposits can be removed with a mild cleaning product. It is important to use a mild and pH-neutral detergent. Do not use strong detergents or cleaners containing abrasives as they may damage the surface.
Follow our recommended weight limits to avoid overloading and ensure long-term performance.- Assembly and Installation
Installation of bathroom accessories with 3M tape
1. Choose a smooth surface for installation and determine the placement of the product. Mark it appropriately to ensure a straight and symmetrical placement.
2. Thoroughly clean the surface to remove any oil and dirt, and let it dry. Use our surface cleaning wipe to effectively remove dirt and grease, ensuring an optimal bonding surface for the 3M products. To remove any lime, grime etc., other detergents suitable for the surface may be needed. Avoid detergents that contain oil. If you are unsure about your specific surface, consult a professional.
3. Remove the protective film by gently peeling it off from the back of the product.
4. Apply the product by pressing it against the surface for 10 seconds.
5. Let the glue harden for 24 hours before subjecting the product to any load for optimal adhesion.
6. The product is ready for use after 24 hours.
Not suitable for uneven surfaces or over a jointThese products are suitable for attachment to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not advisable to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can slide as, for example, wet room wallpaper. On newly tiled walls it is important that the surface is cleaned thoroughly so that no joint film remains on the mounting surface. We do not recommend attaching the products over a joint, as the individual tiles may have different angles or levels. In case of uncertainty consult a professional.
Things to consider when installing our towel railTo ensure the towel rail is mounted correctly, it is important that the various mounting plates are installed on tiles that are at the same level and angle. Since tiles are often set in adhesive manually, they may be slightly uneven. Therefore, carefully check that the tiles are even before installing the mounting plates to ensure a straight and stable installation.
See the full installation instructions and read our care instructions here.-
-
-
-
-
- Material and Finish
- Documentation
- Installation manual
- Product sheet
