Base 200 - Toilet Roll Holder - Brushed Stainless Steel
Login / Retailer
Forgot password?
Base 200 - Toilet Roll Holder - Brushed stainless steel in the group Products / Bathroom Accessories / Toilet paper holder at Beslag Design i Båstad Aktiebolag (60604-21)
Base 200 - Toilet Roll Holder - Brushed stainless steel
Base 200 - Toilet Roll Holder - Brushed stainless steel
Base 200 - Toilet Roll Holder - Brushed stainless steel

Base 200 - Toilet Roll Holder - Brushed stainless steel

60604-21

All products in the Base & Solid series have a self-adhesive back. Easy to mount without drilling.

Attached to permanent smooth surfaces such as tiles, lacquered or veneered board material etc. It is not advisable to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can slide as for example the wet room wallpaper. On newly tiled walls, it is important that the surface is cleaned thoroughly so that no joint film remains on the mounting surface.

In case of uncertainty consult a professional.


Mounting instructions
  1. Clean the substrate thoroughly and allow it to dry. (The detergents shall not contain oil)
  2. Remove the protective film.
  3. Apply the product by pressing it against the substrate for 10 seconds.
  4. For the best results, allow the glue to harden for 24 hours before use.

When cleaning the product, use a clean, damp cloth.

 
Find retailer The product can be found at our retailers.
  • Specifications
  • Article depth: 30 mm
    Article height: 106 mm
    Article length: 137 mm
    Finish: Stainless steel brushed
    Material: Stainless Steel
    Measurements of the foot: 90x45 mm
  • Care instructions
  •  
    Care advice for our bathroom accessories

    When cleaning the product, use a soft, clean, and slightly damp cloth to avoid scratching or damaging the surface. Rinse or wipe with water and dry thoroughly. Stubborn dirt or deposits can be removed with a mild cleaning product. It is important to use a mild and pH-neutral detergent. Do not use strong detergents or cleaners containing abrasives as they may damage the surface.

    Follow our recommended weight limits to avoid overloading and ensure long-term performance.


    Care instructions for stainless steel bathroom accessories

    Follow the care instructions above. If the stainless steel product has stains or discoloration that cannot be removed with normal water washing, the following cleaning methods are recommended:

    • Clean with alcohol, alternatively thinner or acetone, rinse with clean, cold water, and dry.
    • Clean with organic solvents as mentioned above, then wash with soap and water, rinse with clean, cold water, and dry.
    • Clean with a mildly abrasive cleaner such as scouring powder, rub in the direction of any visible surface structure, rinse with clean, cold water, and dry.
    • Rub with a scotch-brite sponge in the direction of any visible surface structure, rinse with clean, cold water, and dry.

  • Assembly and Installation
  •  
    Installation of bathroom accessories with 3M tape



    1. Choose a smooth surface for installation and determine the placement of the product. Mark it appropriately to ensure a straight and symmetrical placement.
    2. Thoroughly clean the surface to remove any oil and dirt, and let it dry. Use our surface cleaning wipe to effectively remove dirt and grease, ensuring an optimal bonding surface for the 3M products. To remove any lime, grime etc., other detergents suitable for the surface may be needed. Avoid detergents that contain oil. If you are unsure about your specific surface, consult a professional.
    3. Remove the protective film by gently peeling it off from the back of the product.
    4. Apply the product by pressing it against the surface for 10 seconds.
    5. Let the glue harden for 24 hours before subjecting the product to any load for optimal adhesion.
    6. The product is ready for use after 24 hours.

     
    Not suitable for uneven surfaces or over a joint

    These products are suitable for attachment to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not advisable to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can slide as, for example, wet room wallpaper. On newly tiled walls it is important that the surface is cleaned thoroughly so that no joint film remains on the mounting surface. We do not recommend attaching the products over a joint, as the individual tiles may have different angles or levels. In case of uncertainty consult a professional.

     
    Things to consider when installing our towel rail

    To ensure the towel rail is mounted correctly, it is important that the various mounting plates are installed on tiles that are at the same level and angle. Since tiles are often set in adhesive manually, they may be slightly uneven. Therefore, carefully check that the tiles are even before installing the mounting plates to ensure a straight and stable installation.


    See the full installation instructions and read our care instructions here.

  • Material and Finish
  • Documentation

  • Here you can browse digitally or download documents with guidance and information.

    O&M documentation for the Base bathroom series

  • Installation manual
  • Product sheet
Available varieties:
Base 200 - Toilet Paper Holder - Brass/bilder/artiklar/liten/605208-21_S.jpg?m=1574345616
Base 200 - Toilet Paper Holder - Matt Black/bilder/artiklar/liten/605226-21_S.jpg?m=1574176425
Base 200 - Toilet Roll Holder - Polished Chrome/bilder/artiklar/liten/60603-21_S.jpg?m=1574350296

Accessories we recommend

Surface cleaning wipe 3M – 2-pack/bilder/artiklar/liten/60404-22_S.jpg?m=1688369759

Related products

Base - Corner shelf - Brushed stainless steel/bilder/artiklar/liten/606072-41_S.jpg?m=1699453820
/bilder/artiklar/liten/606074-41_S.jpg?m=1699453829
Base - Hook rail with shelf - Brushed stainless steel/bilder/artiklar/liten/606066-41_S.jpg?m=1699618975
/bilder/artiklar/liten/606065-41_S.jpg?m=1699618984
/bilder/artiklar/liten/606067-41_S.jpg?m=1699618968
Base - Razor holder - Brushed stainless steel/bilder/artiklar/liten/606075-21_S.jpg?m=1699869984
/bilder/artiklar/liten/606077-21_S.jpg?m=1699871350
/bilder/artiklar/liten/606076-21_S.jpg?m=1699870985
Base - Shelf - Brushed stainless steel/bilder/artiklar/liten/606061-41_S.jpg?m=1593172437
Matt black /bilder/artiklar/liten/606062-41_S.jpg?m=1593172673
Polished chrome /bilder/artiklar/liten/606060-41_S.jpg?m=1593172778
Base - Shower Shelf - Brushed stainless steel/bilder/artiklar/liten/606070-41_S.jpg?m=1628685056
/bilder/artiklar/liten/606071-41_S.jpg?m=1628686049
Base - Soap Pump Holder - Brushed stainless steel/bilder/artiklar/liten/606080-41_S.jpg?m=1628687451
Available in several sizes
/bilder/artiklar/liten/606081-41_S.jpg?m=1628688943
/bilder/artiklar/liten/606082-41_S.jpg?m=1683208518
Base - Toilet paper holder with shelf - Brushed stainless steel/bilder/artiklar/liten/60606-41_S.jpg?m=1699877873
/bilder/artiklar/liten/60608-41_S.jpg?m=1699877887
/bilder/artiklar/liten/60607-41_S.jpg?m=1699877881
Base 200 - 1 Hook - Brushed stainless steel/bilder/artiklar/liten/60508-21_S.jpg?m=1574351181
Polished chrome /bilder/artiklar/liten/60408-21_S.jpg?m=1574347928
Matt black /bilder/artiklar/liten/605220-21_S.jpg?m=1574171597
Brass /bilder/artiklar/liten/605202-21_S.jpg?m=1574178716
Base 200 - 2 Hook - Brushed stainless steel/bilder/artiklar/liten/60509-21_S.jpg?m=1574351428
Polished chrome /bilder/artiklar/liten/60409-21_S.jpg?m=1574348072
Matt black /bilder/artiklar/liten/605222-21_S.jpg?m=1574171698
Brass /bilder/artiklar/liten/605204-21_S.jpg?m=1574345372
Base 200 - 4 Hook - Brushed stainless steel/bilder/artiklar/liten/60512-21_S.jpg?m=1574351547
Polished chrome /bilder/artiklar/liten/60412-21_S.jpg?m=1574348273
Matt black /bilder/artiklar/liten/605224-21_S.jpg?m=1574176138
Brass /bilder/artiklar/liten/605206-21_S.jpg?m=1574345510
Base 200 - Spare Paper Holder - Brushed stainless steel/bilder/artiklar/liten/606027-21_S.jpg?m=1574351769
Polished chrome /bilder/artiklar/liten/606026-21_S.jpg?m=1574350436
Matt black /bilder/artiklar/liten/605228-21_S.jpg?m=1574177082
Brass /bilder/artiklar/liten/605209-21_S.jpg?m=1574345704
Base 200 - Towel Rail - Brushed stainless steel/bilder/artiklar/liten/606047-21_S.jpg?m=1574352081
Polished chrome /bilder/artiklar/liten/606046-21_S.jpg?m=1574350732
Matt black /bilder/artiklar/liten/605230-21_S.jpg?m=1574177722
Brass /bilder/artiklar/liten/605211-21_S.jpg?m=1574346205
Solid / Base - Toilet brush - Stainless Steel Look/bilder/artiklar/liten/620030_S.jpg?m=1574351929
Polished chrome /bilder/artiklar/liten/620010_S.jpg?m=1574350547
Matt black /bilder/artiklar/liten/620031-41_S.jpg?m=1574177263
Brass /bilder/artiklar/liten/620032-41_S.jpg?m=1574345916