Base 200 - Towel Rail - Matt black
605230-21All products in the Base & Solid series have a self-adhesive back. Easy to mount without drilling.
For the towel bar to have a good attachment, it is important that the surface is smooth. If the different mounting plates, for example, are attached to different tile plates, it is important that these are at the same level and angle. Attached to durable smooth surfaces such as tiles, lacquered or veneered board material etc. It is not advisable to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can slide as, for example, wet room wallpaper. On newly tiled walls it is important that the surface is cleaned thoroughly so that no joint film remains on the mounting surface. In case of uncertainty consult a professional.
In case of uncertainty consult a professional.
Mounting instructions
- Clean the substrate thoroughly and allow it to dry. (The detergents shall not contain oil)
- Remove the protective film.
- Apply the product by pressing it against the substrate for 10 seconds.
- For the best results, allow the glue to harden for 24 hours before use.
When cleaning the product, use a clean, damp cloth.
- Specifications
-
Article depth: 55 mm Article diameter: 10 mm Article height: 45 mm Article length: 645 mm C/C-dimensions: 600 mm Finish: Matt black Maximum weight: 4 - Product sheet
-
Product sheet » - FDV documentation
-
-
-
-
-