EU 
NO
SE
Dimmer Touch-Me FW - Alu-look
974272On / Off switch with dimmer for LED lighting with 12V (max 30W) or 24V (max 60W). Recessed mounting. Touch-Me can be connected to drives that are not specially adapted for dimming function.
Dimmer function: Hold your finger on the white LED to adjust the brightness.
On / off: Touch the LED for ignition or extinguishing.
Memory: lights up at the same light level as when it was extinguished.
Night function: The diode on the dimmer glows stronger in the dark. Can be deactivated by holding the diode for about 15 seconds.
Safety function: The dimmer switches off the lights if they have been lit for more than 18 hours.
Cable for actuator: 2000 mm
Cable for terminal block: 2000 mm
Dimmer function: Hold your finger on the white LED to adjust the brightness.
On / off: Touch the LED for ignition or extinguishing.
Memory: lights up at the same light level as when it was extinguished.
Night function: The diode on the dimmer glows stronger in the dark. Can be deactivated by holding the diode for about 15 seconds.
Safety function: The dimmer switches off the lights if they have been lit for more than 18 hours.
Cable for actuator: 2000 mm
Cable for terminal block: 2000 mm
- Specifications
-
Article depth: 1,5 mm Article length: 35 mm Article width: 35 mm Connection type: Micro 12/ Micro 24 Effect (W): Max: 30/60 W Energy class: IP20 Inset depth: 9 mm Recess diameter: 30 mm Voltage (V): 12/24 - Product sheet
-
-
-
-
-
Accessories we recommend
Blogg
There are currently no blogs connected to this article.