Door Stop Helix Stripe - Dark bronze
753114-41The Helix Stripe doorstop is an elegant detail that, with its horizontal lines and minimalist design, becomes a functional and stylish addition to any room. The rubber ring cushions and protects both the door and the walls.
Feel free to combine it with other products in the Helix Stripe series for a cohesive look. A 4x45mm countersunk wood screw is included.
The screw extends 40mm from the mounting part.
Feel free to combine it with other products in the Helix Stripe series for a cohesive look. A 4x45mm countersunk wood screw is included.
The screw extends 40mm from the mounting part.
- Specifications
-
Article depth: 36 mm Article diameter: 38/32,6 mm Article length: 38 mm Article width: 38 mm Material: Aluminium Screws included: Yes - Care instructions
- Assembly and Installation
Installation of wall-mounted door stop1. Place the lower part of the door stop on the wall where you want to install it.
2. Easily mark the drilling point by making a mark through the screw hole.
3. Prepare the installation by drilling a hole and inserting a plug suitable for your wall type (e.g., concrete, drywall, brick).
4. Secure the door stop to the wall using the screws and threads.
Tip! Always use screws and plugs optimized for your specific wall type to ensure a stable and secure installation. Make sure the door stop is in the correct position before fully tightening the screws.
Installation of floor-mounted door stopInstall with the included mounting kit.
1. Place the door stop in the desired position on the floor.
2. Use the included countersunk screw (4x45mm).
3. Screw the screw into the floor surface.
-
-
-
-
-
- Material and Finish
- Documentation
- Installation manual
- Product sheet
Blogg
There are currently no blogs connected to this article.