LED-spot Stella Flat - White
972731No visible diodes and a recess depth of only 8.5mm!
Stella Flat is an updated version of Stella LED spot that was launched at Beslag Design 2011. Stella is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which gives a crystal clear light with no visible diodes. At the same time, energy consumption can be reduced as the number of components passing the current between the circuit board and the diode is reduced.
Stella Flat has a recess depth of at least 8.5 mm. The thin luminaire gives a larger margin when mounted in e.g. shelves and bases. With Stella Flat mounted in a 16 mm frame you get a 7.5 mm margin. The light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light.
Stella LED-spot has a scattering angle of 120 degrees where the light has an even distribution thanks to the large number of LEDs. Simple LED spots with fewer LEDs lack this homogeneous light. At the same time, energy consumption can be reduced as the number of components passing the current between the circuit board and the diode is reduced.
For wet rooms
All Stella LED stains are classified as IP44 / IP20 and can be installed in bathrooms and wet rooms (closed installation)
Voltage regulator 5V, Art.no 971227 - If you have 1. Stella you need 2 regulators, you have 2 Stella used 1. regulator.
Connection cable included.
Stella Flat is an updated version of Stella LED spot that was launched at Beslag Design 2011. Stella is equipped with COB technology (Chip-on-Board). The technology means that the LEDs can be mounted very tightly and directly on the circuit board, which gives a crystal clear light with no visible diodes. At the same time, energy consumption can be reduced as the number of components passing the current between the circuit board and the diode is reduced.
Stella Flat has a recess depth of at least 8.5 mm. The thin luminaire gives a larger margin when mounted in e.g. shelves and bases. With Stella Flat mounted in a 16 mm frame you get a 7.5 mm margin. The light has an even distribution thanks to the large number of LEDs. Simpler LED spots with fewer LEDs lack this homogeneous light.
Stella LED-spot has a scattering angle of 120 degrees where the light has an even distribution thanks to the large number of LEDs. Simple LED spots with fewer LEDs lack this homogeneous light. At the same time, energy consumption can be reduced as the number of components passing the current between the circuit board and the diode is reduced.
For wet rooms
All Stella LED stains are classified as IP44 / IP20 and can be installed in bathrooms and wet rooms (closed installation)
Voltage regulator 5V, Art.no 971227 - If you have 1. Stella you need 2 regulators, you have 2 Stella used 1. regulator.
Connection cable included.
- Specifications
-
Article depth: 10,5 mm Article diameter: 60 mm Article length: 60 mm Article width: 60 mm Brightness (at 500mm): 550 lux Color rendering (CRI): >85 CRI Color Temp (K): 3000 K Connection type: ESP Effect (W): 3 W Energy class: A++ Inset depth: 8,5 mm IP-class: IP-class 44 Light flux (lm): 248 lm Recess diameter: 55 mm - Care instructions
- Assembly and Installation
- Installation guide
-
-
-
-
- Material and Finish
- Documentation
- Installation manual
- Product sheet
Accessories we recommend
Blogg
There are currently no blogs connected to this article.